Won’t your Admiral gas stove burner turn off? The most likely cause is a faulty burner valve that cannot close the gas flow. Turn the control knob to OFF, then shut off the gas supply if the flame remains lit. After the burner cools, remove the knob and try turning the valve stem by hand. If the stem will not rotate, or the burner stays on when the stem is in the OFF position, replace the burner valve. A faulty surface burner valve can cause the same gas burner won't turn off problem and should be replaced if it fails to close. If the valve stem turns normally, inspect the control knob next. A cracked or worn Admiral control knob may not engage the gas valve stem, leaving the burner on. The knob itself may also need replacement if damaged. These are the most common causes of an Admiral gas stove not turning off. Enter your model number to find the exact burner valve, surface burner valve, or replacement knob for your specific gas stove.
01 - Admiral Range/Stove/Oven Valve
A stove burner that won't turn off could be caused by a faulty burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.
Enter model number to search for the required part specific to your product
A stove burner that won't turn off could be caused by a faulty surface burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.