When your Sunray gas stove burner won't turn off, shut off the gas supply at the stove or main valve if you can do so safely, and do not leave the burner unattended. The most likely cause is a defective burner valve or surface burner valve that cannot close the gas flow. Remove the control knob and carefully try turning the valve stem by hand. If the stem will not rotate, feels damaged, or the burner remains lit when the control is set to Off, replace the faulty valve. A cracked or worn control knob is less common but can prevent the knob from turning the gas valve stem. Inspect the knob for damage and replace it if needed. These checks address common problems when a gas stove won't turn off, a gas burner won't turn off, or a gas stove is not turning off. Before ordering, enter your Sunray range model number to find the exact replacement part for your appliance. Repair Clinic carries the correct Sunray burner valve, surface burner valve, control knob, and knob parts to help restore safe burner operation.
01 - Sunray Range/Stove/Oven Valve
A stove burner that won't turn off could be caused by a faulty burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.
Enter model number to search for the required part specific to your product
A stove burner that won't turn off could be caused by a faulty surface burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.