When your RCA gas stove burner won't turn off, shut off the gas supply at the valve until you identify the problem. The most likely cause is a faulty burner valve that cannot close. Remove the control knob and carefully try turning the valve stem by hand. If the stem will not rotate, or the burner stays lit when the control is in the off position, replace the range/stove/oven valve. A defective surface burner valve can cause the same gas stove not turning off problem and should be tested in the same way. If the valve stem turns normally, inspect the burner control knob. A cracked, worn, or broken knob may fail to engage the gas valve stem, leaving the burner on. Replace the control knob or knob if it is damaged. These repairs apply to RCA gas stoves and ranges, including models with gas burner valves and removable knobs. Enter your model number to find the exact replacement part for your specific RCA range, stove, or oven, then use the model-specific part listing to confirm fit before ordering.
01 - RCA Range/Stove/Oven Valve
A stove burner that won't turn off could be caused by a faulty burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.
Enter model number to search for the required part specific to your product
A stove burner that won't turn off could be caused by a faulty surface burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.