Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpMontgomery Wards Oven RepairMontgomery Wards Gas stove burner not heating properly Repair
Montgomery Wards Gas stove burner not heating properly
Is your Montgomery Wards gas stove burner not heating properly? The burner flame may not be responding correctly to the control knob. The most likely cause is a worn or damaged range/stove/oven control knob. A stripped knob may turn without rotating the burner valve stem, so inspect it for cracks, wear, or looseness and replace it if needed. If the knob is in good condition but the flame still does not change from low to high, the surface burner valve may have a damaged or loose stem that is not opening the gas passage correctly. A burner cap that is out of position, warped, or damaged can also create an uneven flame and cause poor heating. Turn off the gas stove and wait until the cooktop is cool, then make sure the cap is seated properly on the burner base. Finally, match the cookware size to the burner for better heat transfer. Whether you are troubleshooting a gas stove weak flame or a gas burner not heating up, enter your Montgomery Wards model number to find the exact replacement control knob, surface burner valve, or burner cap for your appliance.
01 - Montgomery Wards Range/Stove/Oven Control Knob
If a burner flame is not changing as expected when the burner valve control knob is turned from low to high, it's possible the knob is stripped out or damaged and unable to rotate the valve stem. Inspect the knob for any cracks or wear and replace if necessary.
Enter model number to search for the required part specific to your product
Top Solution
02 - Montgomery Wards Range/Stove/Oven Surface Burner Valve
If a burner flame is not changing as expected when the surface burner valve control knob is turned from low to high, it's possible the burner valve stem is damaged and not actuating the valve appropriately. If the valve stem appears loose or wiggles you should replace the surface burner valve.
Less Common
03 - Burner cap not on correctly
Since burner caps help distribute the gas evenly around the burner, a burner cap that is not positioned correctly on the burner base can cause the burner not to heat properly. Confirm the appliance is turned off and the stovetop is cool to the touch, then readjust the burner cap, if necessary, so it is seated properly on the burner base. If the cap is damaged or warped, the flame can be higher on one side than the other. Inspect the burner cap for damage; a damaged burner cap will likely need to be replaced.
Less Common
04 - Incorrect cookware size being used
For best cooking performance use a burner that is best suited for the size of cookware being used. Using cookware that is too small or too large for the burner is not recommended.
Less Common
Frequently Asked Questions
Why is my Montgomery Wards gas stove burner not heating properly?
Why is my Montgomery Wards gas burner flame low or not changing when I turn the knob?
Can a burner cap cause a Montgomery Wards gas stove burner to heat unevenly?
Can the wrong cookware size make a gas stove burner seem like it is not heating properly?
How do I find the correct Montgomery Wards gas stove burner part?
Shop by Popular Montgomery Wards Range/Stove/Oven Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com