Choose Product
Identify Problem
03
Find Solutions

Kenmore Elite Gas stove burner not heating properly

01 - Kenmore Elite Range/Stove/Oven Control Knob

If a burner flame is not changing as expected when the burner valve control knob is turned from low to high, it's possible the knob is stripped out or damaged and unable to rotate the valve stem. Inspect the knob for any cracks or wear and replace if necessary.
Enter model number to search for the required part specific to your product
Top Solution

02 - Kenmore Elite Range/Stove/Oven Surface Burner Valve

If a burner flame is not changing as expected when the surface burner valve control knob is turned from low to high, it's possible the burner valve stem is damaged and not actuating the valve appropriately. If the valve stem appears loose or wiggles you should replace the surface burner valve.
Less Common

03 - Burner cap not on correctly

Since burner caps help distribute the gas evenly around the burner, a burner cap that is not positioned correctly on the burner base can cause the burner not to heat properly. Confirm the appliance is turned off and the stovetop is cool to the touch, then readjust the burner cap, if necessary, so it is seated properly on the burner base. If the cap is damaged or warped, the flame can be higher on one side than the other. Inspect the burner cap for damage; a damaged burner cap will likely need to be replaced.
Less Common

04 - Incorrect cookware size being used

For best cooking performance use a burner that is best suited for the size of cookware being used. Using cookware that is too small or too large for the burner is not recommended.
Less Common