Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpDacor Oven RepairDacor Gas stove burner not heating properly Repair
Dacor Gas stove burner not heating properly
If your Dacor gas stove burner is not heating properly, start with the burner control knob, the most likely cause. A stripped, cracked, or worn knob may turn without properly rotating the valve stem, so the flame stays low instead of adjusting from low to high. If the knob is intact but the flame still does not change, the surface burner valve may be damaged. A loose or wobbly valve stem cannot regulate gas flow correctly and may require a new surface burner valve. Next, turn off the Dacor gas stove and let the cooktop cool before checking the burner cap. A cap that is misplaced, warped, or damaged can distribute gas unevenly, causing a gas burner low flame, uneven heating, or a burner that is not heating up as expected. Also make sure the cookware size matches the burner, since an oversized or undersized pan can reduce cooking performance. These checks apply whether you are searching for a Dacor gas stove not heating properly or a gas stove weak flame problem. Enter your model number to find the exact replacement control knob, surface burner valve, or burner cap for your Dacor range.
01 - Dacor Range/Stove/Oven Control Knob
If a burner flame is not changing as expected when the burner valve control knob is turned from low to high, it's possible the knob is stripped out or damaged and unable to rotate the valve stem. Inspect the knob for any cracks or wear and replace if necessary.
Enter model number to search for the required part specific to your product
Top Solution
02 - Dacor Range/Stove/Oven Surface Burner Valve
If a burner flame is not changing as expected when the surface burner valve control knob is turned from low to high, it's possible the burner valve stem is damaged and not actuating the valve appropriately. If the valve stem appears loose or wiggles you should replace the surface burner valve.
Less Common
03 - Burner cap not on correctly
Since burner caps help distribute the gas evenly around the burner, a burner cap that is not positioned correctly on the burner base can cause the burner not to heat properly. Confirm the appliance is turned off and the stovetop is cool to the touch, then readjust the burner cap, if necessary, so it is seated properly on the burner base. If the cap is damaged or warped, the flame can be higher on one side than the other. Inspect the burner cap for damage; a damaged burner cap will likely need to be replaced.
Less Common
04 - Incorrect cookware size being used
For best cooking performance use a burner that is best suited for the size of cookware being used. Using cookware that is too small or too large for the burner is not recommended.
Less Common
Frequently Asked Questions
Why is my Dacor gas stove burner not heating properly?
Why is my Dacor gas burner flame low or not changing when I turn the knob?
Can a burner cap cause a Dacor gas stove to have a weak flame?
How do I choose the correct Dacor burner knob or surface burner valve?
What should I check if only one Dacor gas stove burner is not heating properly?
Shop by Popular Dacor Range/Stove/Oven Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com