When your Montgomery Wards stove or oven controls are not working, a damaged or stripped control knob is the most likely cause. The timer knob must grip and turn the timer stem, while the thermostat knob must engage the thermostat stem. If either knob is cracked, worn, or slipping, the control will not respond even though the timer or thermostat itself may be fine. A selector knob, control knob, or other stove knob can fail in the same way if it no longer turns the switch or valve stem. This can make the stove controls not work, leave the oven controls not working, or cause the control panel to seem unresponsive. Check each knob for cracks, missing splines, or a loose fit before replacing an internal part. If the problem started after a power outage or surge, turn the range off at the breaker or unplug it for a few minutes, then restore power. Enter your Montgomery Wards model number to find the exact replacement timer knob, thermostat knob, selector knob, or control knob for your range, stove, or oven.
01 - Montgomery Wards Range/Stove/Oven Timer Knob
The stove's timer knob needs to be able to engage and rotate the timer stem for the control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
Enter model number to search for the required part specific to your product
The stove's thermostat knob needs to be able to engage and rotate the thermostat stem for the control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
A stove selector knob needs to be able to engage and rotate the selector switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
04 - Montgomery Wards Range/Stove/Oven Control Knob
A stove control knob needs to be able to engage and rotate the switch or valve stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch or valve.
A stove control knob needs to be able to engage and rotate the switch or valve stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch or valve.
After a power surge or power outage, range controls could be temporarily affected. Full operation can sometimes be restored through a power reset by turning the power to the appliance off for a few minutes and then back on.
Common
Frequently Asked Questions
Why are my Montgomery Wards stove controls not working?
How do I know which Montgomery Wards oven control knob needs replacement?
What should I do if my Montgomery Wards oven controls stopped working after a power outage?
How can I find the correct Montgomery Wards stove control knob?
Could a Montgomery Wards oven control problem be caused by something besides a knob?
Unlock the Right Part for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.