When your Kelvinator stove or oven controls are not working, start with the control knobs before replacing an electrical part. A cracked or stripped timer knob is the most likely cause when the timer will not engage or rotate the timer stem. Next, check the thermostat knob, which must grip the thermostat stem to adjust oven temperature. A damaged selector knob can also prevent the range from switching between bake, broil, or other functions. If another stove control knob slips instead of turning its switch or valve stem, replace the control knob or the correct Kelvinator knob for that position. These problems can look like broader stove controls not working or oven controls not working, but the control panel and internal switches may be fine. If every control stopped responding after a power outage or surge, turn off power to the range for several minutes, then restore it to perform a power reset. Disconnect power before inspecting or replacing knobs. Enter your model number to find the exact replacement timer knob, thermostat knob, selector knob, or control knob for your Kelvinator range, stove, or oven.
01 - Kelvinator Range/Stove/Oven Timer Knob
The stove's timer knob needs to be able to engage and rotate the timer stem for the control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
Enter model number to search for the required part specific to your product
The stove's thermostat knob needs to be able to engage and rotate the thermostat stem for the control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
A stove selector knob needs to be able to engage and rotate the selector switch stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the control.
A stove control knob needs to be able to engage and rotate the switch or valve stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch or valve.
A stove control knob needs to be able to engage and rotate the switch or valve stem for that control to work. If the knob is cracked or stripped out and just slips on the stem a new knob will need to be installed to properly engage the switch or valve.
After a power surge or power outage, range controls could be temporarily affected. Full operation can sometimes be restored through a power reset by turning the power to the appliance off for a few minutes and then back on.
Common
Frequently Asked Questions
Why are my Kelvinator stove and oven controls not working?
Why does my Kelvinator oven control knob turn but not change the setting?
What should I do if my Kelvinator oven controls stopped working after a power outage?
How do I know whether my Kelvinator stove needs a new knob or a control switch?
How do I find the correct replacement knob for my Kelvinator range?
Unlock the Right Part for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.