If your Garland oven turns off by itself, shuts off while baking, or keeps turning off during use, start with the touchpad. Buttons that respond intermittently or not at all usually point to a faulty touchpad that needs replacement. A thermal fuse is another possible cause. It trips if the oven gets too hot, and a blown fuse cuts power so the oven will not heat. Test the thermal fuse with a multimeter for continuity. It cannot be reset, so replace it if it has no continuity. If some touchpad buttons work but others do not, the touchpad and control panel may be defective. If none of the buttons respond, the control board is more likely at fault. Also check for an incoming power problem, including a tripped circuit breaker. Less commonly, loose or burned connections, a failed relay, or an internal fault can cause the Garland control board or main control board to shut off power. Disconnect power before testing or replacing parts. Enter your model number to find the exact replacement part for your Garland range, stove, or oven.
01 - Garland Range/Stove/Oven Touchpad
If the oven turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
03 - Garland Range/Stove/Oven Touchpad and Control Panel
If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).
If an oven turns off on its own there could be an incoming power problem. Verify the circuit breaker hasn't tripped.
Common
05 - Garland Range/Stove/Oven Control Board
The board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.