When your Montgomery Wards oven turns off by itself, the touchpad is the most likely cause, especially when some buttons respond intermittently or not at all. A faulty touchpad can interrupt oven operation and should be replaced. A blown thermal fuse is another possible cause. The fuse trips if the oven gets too hot, cutting power and preventing the oven from heating; test it for continuity with a multimeter, and replace it if it has no continuity because a thermal fuse cannot be reset. If only some buttons work, the touchpad and control panel may be defective. If none of the buttons respond, the control board is more likely at fault. Check the incoming power next by verifying that the circuit breaker has not tripped. Less commonly, loose or burned connections, failed relays, or another fault in the control board or main control board can make the oven shut off while baking. Before ordering a replacement, enter your Montgomery Wards oven model number to find the exact touchpad, thermal fuse, control panel, control board, or main control board for your appliance.
01 - Montgomery Wards Range/Stove/Oven Touchpad
If the oven turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
03 - Montgomery Wards Range/Stove/Oven Touchpad and Control Panel
If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).
If an oven turns off on its own there could be an incoming power problem. Verify the circuit breaker hasn't tripped.
Common
05 - Montgomery Wards Range/Stove/Oven Control Board
The board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
06 - Montgomery Wards Range/Stove/Oven Main Control Board
The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.