Choose Product
Identify Problem
03
Find Solutions

Danby Oven shuts off on its own

When your Danby oven turns off by itself, the touchpad is the most likely cause, especially when some buttons respond intermittently or not at all. A faulty touchpad can make the oven shut off during baking or prevent it from starting again. A blown thermal fuse is another possibility if the oven overheated. Test the fuse for continuity with a multimeter, and replace it if it has no continuity because a thermal fuse cannot be reset. If some buttons work while others do not, the touchpad and control panel may be defective. If none of the buttons respond, the control board is more likely at fault. Also check for an incoming power problem, including a tripped circuit breaker, before replacing parts. Less commonly, loose or burnt connections, a failed relay, or an internally defective control board or main control board can cause a Danby oven to keep turning off. These checks can help diagnose why your oven shuts off on its own without replacing good parts. Enter your model number to find the exact replacement touchpad, thermal fuse, control panel, control board, or main control board for your Danby range, stove, or oven.

01 - Danby Range/Stove/Oven Touchpad

If the oven turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Danby Range/Stove/Oven Thermal Fuse

If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
Common

03 - Danby Range/Stove/Oven Touchpad and Control Panel

If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).
Common

04 - Incoming Power Problem

If an oven turns off on its own there could be an incoming power problem. Verify the circuit breaker hasn't tripped.
Common

05 - Danby Range/Stove/Oven Control Board

The board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common

06 - Danby Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common

Frequently Asked Questions

Why does my Danby oven shut off on its own?
How do I test a Danby oven thermal fuse?
Could the Danby oven touchpad or control panel be causing it to turn off?
How can I tell if the Danby oven control board is bad?
How do I find the correct Danby oven replacement part?