If your Maytag oven turns off by itself, the most likely cause is a failing touchpad, especially if some buttons respond intermittently or do not respond at all. A blown thermal fuse is another possibility. The fuse trips if the oven gets too hot and cannot be reset, so test it for continuity with a multimeter and replace it if it has no continuity. A defective touchpad and control panel can also cause a Maytag oven to shut off or fail to start when only some buttons work. If the entire oven loses power, check for a tripped circuit breaker or another incoming power problem. Less commonly, loose or burned connections, failed relays, or another internal fault in the control board or main control board can interrupt power to the oven. Unplug the range before inspecting wiring or removing parts, and use the model number to find the exact replacement part for your Maytag range, stove, or oven. This guide can help whether your oven turns off during baking, keeps turning off, or will not turn on again afterward.
01 - Maytag Range/Stove/Oven Touchpad
If the oven turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
03 - Maytag Range/Stove/Oven Touchpad and Control Panel
If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).
If an oven turns off on its own there could be an incoming power problem. Verify the circuit breaker hasn't tripped.
Common
05 - Maytag Range/Stove/Oven Control Board
The board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.