Choose Product
Identify Problem
03
Find Solutions

Viking Oven shuts off on its own

01 - Viking Range/Stove/Oven Touchpad

If the oven turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Viking Range/Stove/Oven Thermal Fuse

If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
Common

03 - Viking Range/Stove/Oven Touchpad and Control Panel

If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).
Common

04 - Incoming Power Problem

If an oven turns off on its own there could be an incoming power problem. Verify the circuit breaker hasn't tripped.
Common

05 - Viking Range/Stove/Oven Control Board

The board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common

06 - Viking Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common