If your Dacor oven turns off by itself, shuts off while baking, or keeps turning off during use, start with the touchpad. Buttons that respond intermittently or not at all usually indicate a faulty touchpad that needs replacement. Next, check the thermal fuse. If the Dacor oven gets too hot, this fuse can trip and cut power, although a blown thermal fuse is less common. Test it for continuity with a multimeter, and replace it if it has no continuity because it cannot be reset. A defective touchpad and control panel can cause similar symptoms, especially when some buttons work and others do not. If none of the buttons respond, the control board is more likely at fault. Also verify that the circuit breaker has not tripped, since an incoming power problem can make the Dacor oven shut off. Less common causes include loose or burned connections, failed relays, or a defective control board or main control board. Disconnect power before testing or replacing parts. Enter your Dacor oven model number to find the exact replacement part for your appliance.
01 - Dacor Range/Stove/Oven Touchpad
If the oven turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
03 - Dacor Range/Stove/Oven Touchpad and Control Panel
If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).
If an oven turns off on its own there could be an incoming power problem. Verify the circuit breaker hasn't tripped.
Common
05 - Dacor Range/Stove/Oven Control Board
The board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.