If your Glenwood oven turns off by itself, the touchpad is the most likely cause, especially when some buttons respond intermittently or not at all. Replace the touchpad if its controls are unreliable. A thermal fuse is another possible cause. If the oven overheats, the fuse can trip and shut off power, and a blown fuse will prevent the oven from heating. Test the thermal fuse for continuity with a multimeter, and replace it if it has no continuity because it cannot be reset. If some touchpad buttons work while others do not, the touchpad and control panel may be defective. If no buttons respond, the control board is more likely at fault. Also check for a tripped circuit breaker or another incoming power problem. Less commonly, loose or burned connections, a failed relay, or an internal fault in the Glenwood control board or main control board can make the oven keep turning off or shut off while baking. Disconnect power before testing or replacing parts. Enter your model number to find the exact replacement part for your Glenwood range, stove, or oven.
01 - Glenwood Range/Stove/Oven Touchpad
If the oven turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. However, this is not a common occurrence. To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
03 - Glenwood Range/Stove/Oven Touchpad and Control Panel
If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).
If an oven turns off on its own there could be an incoming power problem. Verify the circuit breaker hasn't tripped.
Common
05 - Glenwood Range/Stove/Oven Control Board
The board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.