When your Glenwood oven is burning food, cooks too hot, or runs hot, check the heating components and temperature controls before replacing parts. The bake element is the most likely cause. It should glow red during operation and have continuity; inspect it for holes, blisters, or other visible damage, and replace it if it fails a multimeter test. Next, check the broil element, which should also glow red and show continuity. A failed element can create an oven temperature problem and affect how evenly food cooks. If both elements appear to work, the control board may have a defective relay that sends excessive or incorrect voltage to the bake and broil circuits. The temperature control thermostat is another possibility because it regulates oven temperature and must be replaced if defective. Less commonly, a faulty main control board or oven control board may misread sensor input or control the heating circuits improperly. Always disconnect power before testing or servicing your Glenwood range, stove, or oven. Enter your model number to find the exact replacement bake element, broil element, thermostat, or control board for your appliance.
01 - Glenwood Range/Stove/Oven Bake Element
When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.
Enter model number to search for the required part specific to your product
The broil element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
04 - Glenwood Range/Stove/Oven Temperature Control Thermostat
The temperature control thermostat regulates the broiler temperature. If the thermostat is defective, it may fail to heat the broiler element. The oven thermostat is not repairable—if the thermostat is defective, you must replace it.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.