If your Electrolux range is producing a burning smell, stop using it until you identify the source and inspect the oven safely. A defective temperature control thermostat is the most likely cause listed for this problem, especially if the smell occurs during broiling or the broiler is not heating correctly. Next, the oven control board, main control board, or oven control board may have a failed relay or electrical fault that affects the bake and broil circuits, causing an electrical burning smell from the stove. A shorted bake element or broil element can also create a burning smell from the oven. Look for holes, blisters, or visible damage, then use a multimeter to test the element for continuity and check for a short to the outer case. Replace a defective thermostat, control board, bake element, or broil element rather than attempting to repair it. Disconnect power before testing or removing parts. Enter your Electrolux range model number to find the exact replacement part that fits your appliance.
01 - Electrolux Range/Stove/Oven Temperature Control Thermostat
The temperature control thermostat regulates the broiler temperature. If the thermostat is defective, it may fail to heat the broiler element. The oven thermostat is not repairable—if the thermostat is defective, you must replace it.
Enter model number to search for the required part specific to your product
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
03 - Electrolux Range/Stove/Oven Main Control Board
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
04 - Electrolux Range/Stove/Oven Oven Control Board
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Sometimes, if the heating element burns out, it can short out to the inside of the oven. Often, if the bake element has shorted out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has shorted out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.
If the broil element is shorted out. Often, if the element has shorted out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element is shorted out, use a multimeter to test the element for continuity. If the broil element shows continuity from the terminals to the outer case, this indicates that it is shorted out. If the broil element is shorted out, replace it.