If your Garland range is producing a burning smell, unplug it or turn off the circuit breaker and let it cool before inspecting the oven. A defective temperature control thermostat is the most likely cause listed for this problem. The thermostat regulates broiler temperature, and it must be replaced if it fails. Next, check the Garland range control board, main control board, or oven control board. These boards use relays to send voltage to the bake and broil circuits, and a failed relay can create an electrical burning smell or prevent the heating components from operating correctly. Inspect the bake element for holes, blisters, or other visible damage, then use a multimeter to test it for continuity. A bake element that has shorted to the oven interior should be replaced. Also inspect the broil element for damage and test for continuity from each terminal to the outer case. Continuity to the case indicates a shorted broil element. These are common causes of a burning smell from the oven or range burning smell. Enter your Garland range model number to find the exact replacement part for your specific appliance.
01 - Garland Range/Stove/Oven Temperature Control Thermostat
The temperature control thermostat regulates the broiler temperature. If the thermostat is defective, it may fail to heat the broiler element. The oven thermostat is not repairable—if the thermostat is defective, you must replace it.
Enter model number to search for the required part specific to your product
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Sometimes, if the heating element burns out, it can short out to the inside of the oven. Often, if the bake element has shorted out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has shorted out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.
If the broil element is shorted out. Often, if the element has shorted out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element is shorted out, use a multimeter to test the element for continuity. If the broil element shows continuity from the terminals to the outer case, this indicates that it is shorted out. If the broil element is shorted out, replace it.