If your Ikea range is producing a burning smell, unplug the range or switch off its circuit breaker before inspecting it, especially if the odor smells electrical. The most likely causes are a defective temperature control thermostat, a failed control board, main control board, or oven control board, followed by a shorted bake element or broil element. A thermostat problem can affect broiler temperature, while a failed control board may stop sending voltage to the bake and broil circuits. Inspect the bake element for holes, blisters, or other visible damage, and check it with a multimeter for continuity. Test the broil element as well. Continuity between its terminals and the outer metal case indicates the element is shorted and needs replacement. These failures can cause a burning smell from the oven, a range burning smell, or an electrical burning smell from the stove. Always use the correct replacement part for your specific Ikea range, since control boards and heating components vary by model. Enter your model number to find the exact thermostat, control board, main control board, oven control board, bake element, or broil element for your range.
01 - Ikea Range/Stove/Oven Temperature Control Thermostat
The temperature control thermostat regulates the broiler temperature. If the thermostat is defective, it may fail to heat the broiler element. The oven thermostat is not repairable—if the thermostat is defective, you must replace it.
Enter model number to search for the required part specific to your product
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Sometimes, if the heating element burns out, it can short out to the inside of the oven. Often, if the bake element has shorted out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has shorted out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.
If the broil element is shorted out. Often, if the element has shorted out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element is shorted out, use a multimeter to test the element for continuity. If the broil element shows continuity from the terminals to the outer case, this indicates that it is shorted out. If the broil element is shorted out, replace it.