If your Dacor range is producing a burning smell, stop using it until you identify the source. A defective temperature control thermostat is the most likely cause listed for this problem. The thermostat regulates broiler temperature, and if it fails, it can affect the broil circuit and may need to be replaced because it is not repairable. Next, check the Dacor range control board, main control board, or oven control board. These boards use relays to send voltage to the bake and broil circuits, and a failed relay can create an electrical burning smell from the stove or prevent the heating components from operating correctly. A shorted bake element is another common possibility. Look for holes, blisters, or other visible damage, then use a multimeter to test the element for continuity. Finally, inspect the broil element for damage and test for continuity between its terminals and outer case. Continuity to the case indicates a short and means the broil element should be replaced. Enter your Dacor range model number to find the exact replacement thermostat, control board, bake element, or broil element for your appliance.
01 - Dacor Range/Stove/Oven Temperature Control Thermostat
The temperature control thermostat regulates the broiler temperature. If the thermostat is defective, it may fail to heat the broiler element. The oven thermostat is not repairable—if the thermostat is defective, you must replace it.
Enter model number to search for the required part specific to your product
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Sometimes, if the heating element burns out, it can short out to the inside of the oven. Often, if the bake element has shorted out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has shorted out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.
If the broil element is shorted out. Often, if the element has shorted out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element is shorted out, use a multimeter to test the element for continuity. If the broil element shows continuity from the terminals to the outer case, this indicates that it is shorted out. If the broil element is shorted out, replace it.