If your Admiral wall oven has a burning smell, stop using it and disconnect power if you see smoke, melted wiring, or smell an electrical burning odor. The most likely causes are a defective temperature control thermostat, which can affect broiler operation, followed by a faulty oven control board or main control board that fails to send voltage correctly to the heating components. A burned-out bake element or broil element can also cause an oven burning smell. With power disconnected and the oven cool, inspect both elements for holes, blisters, or visible damage. A multimeter continuity test can confirm whether an element has failed. If your Admiral wall oven is producing an electrical burning smell, inspect the terminal block and power cord connections for loose, overheated, or melted wires. Damaged terminal block connections can create excess heat and require replacement, while damaged wiring or a power cord may need professional electrical service. Enter your model number to find the exact thermostat, control board, bake element, broil element, terminal block, or other replacement part for your specific Admiral wall oven.
01 - Admiral Range/Stove/Oven Temperature Control Thermostat
The temperature control thermostat regulates the broiler temperature. If the thermostat is defective, it may fail to heat the broiler element. The oven thermostat is not repairable—if the thermostat is defective, you must replace it.
Enter model number to search for the required part specific to your product
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.
The broil element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.
If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.