Danby Wall oven is producing a burning smell

If your Danby wall oven is producing a burning smell, stop using it until you identify the source. A defective temperature control thermostat is the most likely cause listed for this symptom. The thermostat regulates broiler temperature and may fail to control the broil element correctly. Next, a faulty control board or main control board may have damaged relays that prevent proper voltage from reaching the heating components, creating an electrical burning smell. A burned-out bake element or broil element can also cause a burning smell from the oven. Inspect both elements for holes, blisters, or other visible damage, and use a multimeter to check continuity. Finally, inspect the terminal block and power cord connections. Loose or burned connections can overheat, melt wire insulation, and create a serious fire hazard. Replace damaged parts and have a licensed electrician inspect a damaged receptacle or power cord. These checks can help diagnose a Danby wall oven burning smell without replacing the entire appliance. Enter your model number to find the exact replacement thermostat, control board, bake element, broil element, or terminal block for your specific Danby wall oven.

01 - Danby Range/Stove/Oven Temperature Control Thermostat

The temperature control thermostat regulates the broiler temperature. If the thermostat is defective, it may fail to heat the broiler element. The oven thermostat is not repairable—if the thermostat is defective, you must replace it.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Danby Range/Stove/Oven Temperature Control Thermostat Parts

02 - Danby Range/Stove/Oven Control Board

The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.

Shop all Danby Range/Stove/Oven Control Board Parts

03 - Danby Range/Stove/Oven Main Control Board

Shop all Danby Range/Stove/Oven Main Control Board Parts

04 - Danby Range/Stove/Oven Bake Element

When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Shop all Danby Range/Stove/Oven Bake Element Parts

Highly Likely

05 - Danby Range/Stove/Oven Broil Element

The broil element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.

Shop all Danby Range/Stove/Oven Broil Element Parts

Highly Likely

06 - Danby Range/Stove/Oven Terminal Block

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.

Shop all Danby Range/Stove/Oven Terminal Block Parts

Common

Frequently Asked Questions

Why does my Danby wall oven smell like burning?

Could a bake or broil element cause a burning smell in my Danby wall oven?

How do I check the terminal block if my Danby wall oven smells like burning?

Should I replace the Danby oven control board or thermostat first?

How do I find the right replacement part for my Danby wall oven?

Talk With Us

We can help you check an order, track a package, start a return, and more.

START A CHAT

Talk With Us

We can help you check an order, track a package, start a return, and more.

Join Repair Clinic's VIP email list for 10% off, plus other discounts and tips!

Our Story

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.

About Repair Clinic

Customer Stories Repair Parts BrandsDIY Repair Blog In the News