If your Norge cooktop is producing a burning smell, shut off the range and disconnect power before inspecting it. An electrical burning smell from the stove can indicate a failing control board, main control board, or oven control board. These boards use relays to send voltage to the surface element circuits, and a damaged relay or overheated connection can create an odor or stop a burner from working. Next, check the surface element switch, especially if one electric burner is affected. The switch sends power to the surface element coil and should be replaced if it is defective. If two or more burners have problems, the surface element board may have a failed relay. For a single burner issue, test the surface element for continuity before replacing the board. Also inspect the element receptacle and wire kit for burnt contacts, melted plastic, or damaged element prongs. Replace both the receptacle and element if the prongs show heat damage. These are common causes of a Norge cooktop burning smell and may also cause the cooktop to stop heating. Enter your model number to find the exact replacement part for your Norge range, stove, or oven.
01 - Norge Range/Stove/Oven Control Board
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Enter model number to search for the required part specific to your product
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
04 - Norge Range/Stove/Oven Surface Element Switch
The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work. If there is another element of the same size on the stove, try switching the elements. If the surface element still doesn’t work, the surface element switch is likely defective. The surface element switch cannot be tested or repaired—if you suspect the switch is defective, replace it.
The surface element board has relays that regulate the power supply to the burners. If one or more of the relays fails, the surface element won’t work. If two or more burners fail at the same time, this indicates that the surface element board is likely at fault. If only one surface element won’t work, use a multimeter to test the element for continuity. If the surface element has continuity, the surface element board might be defective.
06 - Norge Range/Stove/Oven Element Receptacle and Wire Kit
The surface element plugs onto a receptacle. Over time, the contacts in the receptacle can burn out. If the receptacle contacts burn out, the surface element will not receive power. To determine if the element receptacle has failed, inspect the receptacle contacts. If the contacts are visibly burnt or damaged, replace the element receptacle. In addition, examine the element prongs for signs of burning. If the prongs are burnt, replace both the element and element receptacle.