If your Frigidaire cooktop has a burning smell, stop using it and turn off power at the breaker until you identify the problem. An electrical burning smell from a stove can come from a failed control board, which uses relays to send voltage to the surface element circuits. The main control board or oven control board can cause the same symptom when its relays fail or overheat. Next, check the surface element switch, especially if one burner is affected. You can swap that surface element with another element of the same size to help determine whether the switch or element is at fault. If two or more burners are affected, the surface element board is more likely defective. For one burner, test the surface element for continuity, then inspect the element receptacle and wire kit. Burned receptacle contacts or damaged element prongs can create heat and a burning smell, so replace both parts when needed. This Frigidaire cooktop repair may involve live voltage, so follow proper safety procedures. Enter your model number to find the exact replacement control board, surface element switch, surface element board, or element receptacle for your specific Frigidaire cooktop.
01 - Frigidaire Range/Stove/Oven Control Board
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Enter model number to search for the required part specific to your product
02 - Frigidaire Range/Stove/Oven Main Control Board
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
03 - Frigidaire Range/Stove/Oven Oven Control Board
The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
04 - Frigidaire Range/Stove/Oven Surface Element Switch
The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work. If there is another element of the same size on the stove, try switching the elements. If the surface element still doesn’t work, the surface element switch is likely defective. The surface element switch cannot be tested or repaired—if you suspect the switch is defective, replace it.
05 - Frigidaire Range/Stove/Oven Surface Element Board
The surface element board has relays that regulate the power supply to the burners. If one or more of the relays fails, the surface element won’t work. If two or more burners fail at the same time, this indicates that the surface element board is likely at fault. If only one surface element won’t work, use a multimeter to test the element for continuity. If the surface element has continuity, the surface element board might be defective.
06 - Frigidaire Range/Stove/Oven Element Receptacle and Wire Kit
The surface element plugs onto a receptacle. Over time, the contacts in the receptacle can burn out. If the receptacle contacts burn out, the surface element will not receive power. To determine if the element receptacle has failed, inspect the receptacle contacts. If the contacts are visibly burnt or damaged, replace the element receptacle. In addition, examine the element prongs for signs of burning. If the prongs are burnt, replace both the element and element receptacle.