Maytag Cooktop is producing a burning smell

If your Maytag cooktop is producing a burning smell, turn off the cooktop and disconnect power before inspecting it. An electrical burning smell from a Maytag cooktop often points to a failed control board, main control board, or oven control board. These boards use relays to send voltage to the surface element circuits, and a damaged relay or wiring connection can overheat and create a burning smell. Next, check the surface element switch. A defective switch may send power incorrectly or fail to power the surface element, and it must be replaced rather than repaired. If more than one burner is affected, the surface element board may have a failed relay. If only one burner is involved, test the surface element for continuity before replacing the board. Also inspect the element receptacle and wire kit for burnt contacts, melted insulation, or damaged element prongs. Replace both the receptacle and element if the prongs are burned. These Maytag cooktop repair parts can correct a range burning smell caused by overheated electrical components. Enter your model number to find the exact replacement part for your specific Maytag cooktop.

01 - Maytag Range/Stove/Oven Control Board

The control board has relays that send voltage to the surface element circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Maytag Range/Stove/Oven Control Board Parts

02 - Maytag Range/Stove/Oven Main Control Board

Shop all Maytag Range/Stove/Oven Main Control Board Parts

03 - Maytag Range/Stove/Oven Oven Control Board

Shop all Maytag Range/Stove/Oven Oven Control Board Parts

04 - Maytag Range/Stove/Oven Surface Element Switch

The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work. If there is another element of the same size on the stove, try switching the elements. If the surface element still doesn’t work, the surface element switch is likely defective. The surface element switch cannot be tested or repaired—if you suspect the switch is defective, replace it.

Shop all Maytag Range/Stove/Oven Surface Element Switch Parts

Highly Likely

05 - Maytag Range/Stove/Oven Surface Element Board

The surface element board has relays that regulate the power supply to the burners. If one or more of the relays fails, the surface element won’t work. If two or more burners fail at the same time, this indicates that the surface element board is likely at fault. If only one surface element won’t work, use a multimeter to test the element for continuity. If the surface element has continuity, the surface element board might be defective.

Shop all Maytag Range/Stove/Oven Surface Element Board Parts

Highly Likely

06 - Maytag Range/Stove/Oven Element Receptacle and Wire Kit

The surface element plugs onto a receptacle. Over time, the contacts in the receptacle can burn out. If the receptacle contacts burn out, the surface element will not receive power. To determine if the element receptacle has failed, inspect the receptacle contacts. If the contacts are visibly burnt or damaged, replace the element receptacle. In addition, examine the element prongs for signs of burning. If the prongs are burnt, replace both the element and element receptacle.

Shop all Maytag Range/Stove/Oven Element Receptacle and Wire Kit Parts

Common

Frequently Asked Questions

What should I do if my Maytag cooktop has an electrical burning smell?

Why does my Maytag cooktop smell like burning when one burner is on?

Can a Maytag surface element switch cause a burning smell?

Could the Maytag cooktop control board be causing the burning smell?

How do I find the correct Maytag cooktop part for this repair?

Shop by Popular Maytag Range/Stove/Oven Models

Talk With Us

We can help you check an order, track a package, start a return, and more.

START A CHAT

Talk With Us

We can help you check an order, track a package, start a return, and more.

Join Repair Clinic's VIP email list for 10% off, plus other discounts and tips!

Our Story

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.

About Repair Clinic

Customer Stories Repair Parts BrandsDIY Repair Blog In the News