Choose Product
Identify Problem
03
Find Solutions

Dynasty Oven light not turning off

When your Dynasty oven light won't turn off, the light switch is the most likely cause. A shorted light switch can continue sending power to the bulb even when the switch is in the off position. Test the switch for continuity with a multimeter, and replace it if it has continuity while off. If the oven light stays on when you press the control button, the touchpad and control panel may not be registering the command. Test the other buttons on the oven control panel. If some respond and others do not, the touchpad and control panel or touchpad may be defective. A shorted oven control board can also keep the light on after the light switch is ruled out. Check that the Dynasty oven door closes tightly, since a bent door hinge can prevent the light switch from being activated. A faulty door switch is less common, but it can also cause the oven light not turning off. Enter your model number to find the exact replacement light switch, touchpad, control panel, control board, door hinge, or door switch for your Dynasty oven.

01 - Dynasty Range/Stove/Oven Light Switch

The light switch sends power to the light. If the light switch is shorted the light will stay on. You can test the light switch for continuity with a multimeter. If the light switch shows continuity even in the off position, the switch is bad and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Dynasty Range/Stove/Oven Touchpad and Control Panel

If the light is not turning off when the button is pressed, the button may not be activating. To determine if the touchpad and control panel are defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad and control panel.
Common

03 - Dynasty Range/Stove/Oven Touchpad

If the light is not turning off when the button is pressed, the button may not be activating. To determine if the touchpad is defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad.
Common

04 - Dynasty Range/Stove/Oven Control Board

The oven light often gets its power from the control board. If the control board is shorted the light can stay on. If the light switch is in the off position, but the light stays on, the control board has likely shorted and will need to be replaced.
Less Common

05 - Dynasty Range/Stove/Oven Door Hinge

If the door isn't closing properly the light switch may not be actuated, keeping the light on. Check to see that the door is closing tight. If the door opens past 90 degrees, the door hinges are likely bent and will need to be replaced.
Less Common

06 - Dynasty Range/Stove/Oven Door Switch

On some models, the door switch controls when the oven light is turned on and off. If the door switch has shorted the light may stay on. You can test the switch for continuity with a multimeter. If the switch shows continuity even in the off position, the switch has shorted and will need to be replaced.
Uncommon But Possible

Frequently Asked Questions

Why won't my Dynasty oven light turn off?
How do I test a Dynasty oven light switch or door switch?
Could a Dynasty oven touchpad or control panel keep the light on?
Can a Dynasty oven door hinge cause the oven light to stay on?
How do I find the correct Dynasty oven light switch or other replacement part?