If your Americana oven light won't turn off, the light switch is the most likely cause. A shorted range/stove/oven light switch can continue sending power to the bulb even when the switch is in the off position. Test the switch for continuity with a multimeter and replace it if it shows continuity when off. If the oven light stays on when you press the control button, the touchpad and control panel may not be registering the command. A faulty touchpad alone can cause the same oven light not turning off problem. If the light switch and controls test good, a shorted oven control board may be supplying constant power to the light. Also check that the oven door closes tightly. A bent door hinge can prevent the door from activating the light switch, while a shorted door switch can keep the light on. Disconnect power before testing or replacing parts. Enter your Americana range, stove, or oven model number to find the exact replacement light switch, touchpad, control panel, control board, door hinge, or door switch for your appliance.
01 - Americana Range/Stove/Oven Light Switch
The light switch sends power to the light. If the light switch is shorted the light will stay on. You can test the light switch for continuity with a multimeter. If the light switch shows continuity even in the off position, the switch is bad and will need to be replaced.
Enter model number to search for the required part specific to your product
02 - Americana Range/Stove/Oven Touchpad and Control Panel
If the light is not turning off when the button is pressed, the button may not be activating. To determine if the touchpad and control panel are defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad and control panel.
If the light is not turning off when the button is pressed, the button may not be activating. To determine if the touchpad is defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad.
The oven light often gets its power from the control board. If the control board is shorted the light can stay on. If the light switch is in the off position, but the light stays on, the control board has likely shorted and will need to be replaced.
If the door isn't closing properly the light switch may not be actuated, keeping the light on. Check to see that the door is closing tight. If the door opens past 90 degrees, the door hinges are likely bent and will need to be replaced.
On some models, the door switch controls when the oven light is turned on and off. If the door switch has shorted the light may stay on. You can test the switch for continuity with a multimeter. If the switch shows continuity even in the off position, the switch has shorted and will need to be replaced.