Choose Product
Identify Problem
03
Find Solutions

Sears Oven meat thermometer not working

01 - Sears Range/Stove/Oven Meat Probe

The meat probe resistance changes with the temperature of the probe. If the probe shows an open circuit when tested with a multimeter, the probe is bad and will need to be replaced.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Sears Range/Stove/Oven Control Board

When the probe is plugged into the jack, the control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Common

03 - Sears Range/Stove/Oven Door Switch

Some oven meat thermometers will not function properly unless the oven door is closed which activates a door switch to alert the control board that the door is closed. If the door switch is defective, the oven meat thermometer may not work. To determine if the switch is defective, use a multimeter to test it for electrical continuity when actuated. If the door switch does test appropriately for continuity, replace it.
Uncommon But Possible

04 - Sears Range/Stove/Oven Receptacle

The meat probe jack or receptacle needs to be clean and making good contact with the meat probe. If the receptacle appears corroded or damaged, the component should be replaced.
Uncommon But Possible

05 - Sears Range/Stove/Oven Oven Control Board

When the probe is plugged into the jack, the oven control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Uncommon But Possible