Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpDacor Oven RepairDacor Oven meat thermometer not working Repair
Dacor Oven meat thermometer not working
When your Dacor oven probe is not working, the display may show a probe error, fail to detect the meat thermometer, or provide inaccurate food temperature readings. The most likely cause is a defective meat probe. Its resistance should change as the probe temperature changes, and an open circuit on a multimeter test means the probe needs replacement. If the probe tests good, the Dacor oven control board may not be reading the signal correctly. Next, check the oven door switch, since some Dacor ovens require the door to be closed before the oven probe operates. Test the switch for electrical continuity when activated and replace it if it fails. A dirty, corroded, or damaged probe receptacle can also prevent good contact, so inspect and clean the jack or replace the receptacle when necessary. Less commonly, the oven control board may be faulty. Whether you need an oven probe, meat thermometer, probe jack, door switch, or control board, enter your model number to find the exact replacement part for your specific Dacor range, stove, or oven.
01 - Dacor Range/Stove/Oven Meat Probe
The meat probe resistance changes with the temperature of the probe. If the probe shows an open circuit when tested with a multimeter, the probe is bad and will need to be replaced.
Enter model number to search for the required part specific to your product
Highly Likely
02 - Dacor Range/Stove/Oven Control Board
When the probe is plugged into the jack, the control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Common
03 - Dacor Range/Stove/Oven Door Switch
Some oven meat thermometers will not function properly unless the oven door is closed which activates a door switch to alert the control board that the door is closed. If the door switch is defective, the oven meat thermometer may not work. To determine if the switch is defective, use a multimeter to test it for electrical continuity when actuated. If the door switch does test appropriately for continuity, replace it.
Uncommon But Possible
04 - Dacor Range/Stove/Oven Receptacle
The meat probe jack or receptacle needs to be clean and making good contact with the meat probe. If the receptacle appears corroded or damaged, the component should be replaced.
Uncommon But Possible
05 - Dacor Range/Stove/Oven Oven Control Board
When the probe is plugged into the jack, the oven control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Uncommon But Possible
Frequently Asked Questions
Why is my Dacor oven meat thermometer not working?
How do I test a Dacor oven probe that is not working?
What should I check if my Dacor oven probe is good but shows a probe error?
Does the Dacor oven control board cause the oven meat thermometer to stop working?
How do I find the correct Dacor oven meat probe or receptacle?
Shop by Popular Dacor Range/Stove/Oven Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com