Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpGlenwood Oven RepairGlenwood Oven meat thermometer not working Repair
Glenwood Oven meat thermometer not working
Is your Glenwood oven meat thermometer not working? The meat probe is the most likely cause. The probe changes resistance as its temperature changes, and an open circuit measured with a multimeter indicates that the probe needs replacement. A damaged or unresponsive control board is the next likely cause, especially when the oven probe and probe jack test good but the display does not respond or shows a probe error. An uncommon but possible cause is a defective door switch. Some Glenwood ovens require the door to be closed so the switch can signal the control board before the oven thermometer operates. Test the switch for continuity while actuated. A dirty, corroded, or damaged receptacle can also prevent the probe from making proper contact, and the oven control board may be at fault if the probe and jack are working correctly. Before ordering an oven probe, door switch, receptacle, or control board, enter your model number to find the exact replacement part for your specific Glenwood range, stove, or oven.
01 - Glenwood Range/Stove/Oven Meat Probe
The meat probe resistance changes with the temperature of the probe. If the probe shows an open circuit when tested with a multimeter, the probe is bad and will need to be replaced.
Enter model number to search for the required part specific to your product
Highly Likely
02 - Glenwood Range/Stove/Oven Control Board
When the probe is plugged into the jack, the control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Common
03 - Glenwood Range/Stove/Oven Door Switch
Some oven meat thermometers will not function properly unless the oven door is closed which activates a door switch to alert the control board that the door is closed. If the door switch is defective, the oven meat thermometer may not work. To determine if the switch is defective, use a multimeter to test it for electrical continuity when actuated. If the door switch does test appropriately for continuity, replace it.
Uncommon But Possible
04 - Glenwood Range/Stove/Oven Receptacle
The meat probe jack or receptacle needs to be clean and making good contact with the meat probe. If the receptacle appears corroded or damaged, the component should be replaced.
Uncommon But Possible
05 - Glenwood Range/Stove/Oven Oven Control Board
When the probe is plugged into the jack, the oven control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Uncommon But Possible
Frequently Asked Questions
Why is my Glenwood oven meat thermometer not working?
What should I check if my Glenwood oven probe is good but still does not work?
Can a Glenwood oven door switch cause a meat probe error?
Is the Glenwood oven control board bad if the probe and jack test good?
How do I find the correct Glenwood oven meat probe or receptacle?
Shop by Popular Glenwood Range/Stove/Oven Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com