Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpSunray Oven RepairSunray Oven meat thermometer not working Repair
Sunray Oven meat thermometer not working
Is your Sunray oven meat thermometer not working? The meat probe is the most likely cause. The probe's resistance changes as its temperature changes, and an open circuit during a multimeter test indicates the probe has failed and needs replacement. If the probe tests good, check the probe jack or receptacle for corrosion, damage, dirt, or poor contact. A faulty control board can also cause an oven probe not working problem because the board reads the probe's temperature through the jack. On some Sunray range, stove, and oven models, a door switch must signal that the oven door is closed before the meat thermometer will operate. Test the switch for continuity while it is actuated, and replace it if it does not respond correctly. Less commonly, the oven control board may have failed even when the probe and receptacle are good. Before ordering a meat probe, receptacle, door switch, or control board, enter your model number to find the exact replacement part for your specific Sunray range, stove, or oven.
01 - Sunray Range/Stove/Oven Meat Probe
The meat probe resistance changes with the temperature of the probe. If the probe shows an open circuit when tested with a multimeter, the probe is bad and will need to be replaced.
Enter model number to search for the required part specific to your product
Highly Likely
02 - Sunray Range/Stove/Oven Control Board
When the probe is plugged into the jack, the control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Common
03 - Sunray Range/Stove/Oven Door Switch
Some oven meat thermometers will not function properly unless the oven door is closed which activates a door switch to alert the control board that the door is closed. If the door switch is defective, the oven meat thermometer may not work. To determine if the switch is defective, use a multimeter to test it for electrical continuity when actuated. If the door switch does test appropriately for continuity, replace it.
Uncommon But Possible
04 - Sunray Range/Stove/Oven Receptacle
The meat probe jack or receptacle needs to be clean and making good contact with the meat probe. If the receptacle appears corroded or damaged, the component should be replaced.
Uncommon But Possible
05 - Sunray Range/Stove/Oven Oven Control Board
When the probe is plugged into the jack, the oven control board monitors the food temperature from the probe. If the temperature probe and jack are good but the control board is not responding, the control board is likely bad.
Uncommon But Possible
Frequently Asked Questions
Why is my Sunray oven probe not working?
How do I test an oven meat probe with a multimeter?
What should I check if the oven probe and jack are good?
How do I know which Sunray oven probe replacement part to buy?
Can I replace the Sunray oven control board if the meat thermometer still does not work?
Shop by Popular Sunray Range/Stove/Oven Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com