Choose Product
Identify Problem
03
Find Solutions

Norge Gas Stove burner flames too high

When your Norge gas stove flame is too high, start with the burner air mixture, then check the burner cap before replacing parts. An air shutter near the burner orifice may be adjusted incorrectly, allowing too much or too little air and producing a hissing or lazy, high flame. Many newer Norge gas stoves use fixed air shutters. Next, turn off the gas stove, let the cooktop cool, and make sure each burner cap is seated flat on its burner base. A warped or damaged burner cap can make the gas burner flame too high on one side and may need replacement. If all burners have high flames, the pressure regulator may be set for the wrong gas type or may need adjustment. A qualified technician should inspect or replace the gas regulator. A wrong orifice, or an orifice drilled for the wrong gas, can also allow excessive gas flow. Check the installation instructions or parts diagram for the correct burner orifice. If only one burner is affected, inspect its orifice and surface burner cap first. Enter your Norge range model number to find the exact replacement burner cap, regulator, or orifice for your specific appliance.

01 - Burner Air Mixture Not Adjusted Properly

Some burners have an adjustable air shutter just before the orifice. If the air shutter is not adjusted properly, the flame will hiss from too much air or too little air will result in a lazy high flame. Most newer ranges have fixed air shutters that are not adjustable.
Top Solution

02 - Burner cap not on properly

Since burner caps help distribute the gas evenly around the burner, a burner cap that is not positioned correctly on the burner base can cause the burner not to heat properly. Confirm the appliance is turned off and the stovetop is cool to the touch, then readjust the burner cap, if necessary, so it is seated properly on the burner base. If the cap is damaged or warped, the flame can be higher on one side than the other. Inspect the burner cap for damage; a damaged burner cap will likely need to be replaced.
Common

03 - Norge Range/Stove/Oven Pressure Regulator

A pressure regulator is needed on a gas range to keep the pressure constant. If the pressure regulator is not adjusted properly, or is set for the wrong type of gas, the flames can be too high. This will affect all the burners. If you suspect the regulator is bad or not adjusted properly it is best to have a qualified technician check, adjust, or replace the regulator if needed.
Enter model number to search for the required part specific to your product
Common

04 - Wrong Orifice Installed

To work properly all burners need the correct orifice for the type of gas that is being used. If the burner flame is too high, either the gas pressure is too high or the orifice is too large. Check the parts diagram or the installation instructions for the proper burner orifice.
Common

05 - Norge Range/Stove/Oven Orifice

All orifices are drilled and numbered according to the size of the hole. If the wrong orifice was installed in a burner, the flame can be too high. Make sure the correct orifice is installed in the burner.
Less Common

06 - Norge Range/Stove/Oven Surface Burner Cap

A surface burner cap needs to be seated flat on the burner base for the flame to be evenly distributed. If a burner cap is tilted, the flames will be higher on one side than the other. If the cap is damaged, it will need to be replaced.
Uncommon But Possible

Frequently Asked Questions

Why is my Norge gas stove flame too high?
How do I adjust the flame on my Norge gas stove?
Why is one burner flame too high while the others work normally?
Why are all the burners on my Norge gas stove producing flames that are too high?
How do I find the correct Norge gas stove burner cap, orifice, or pressure regulator?