Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpDynasty Oven RepairDynasty Gas Stove burner flames too high Repair
Dynasty Gas Stove burner flames too high
If your Dynasty gas stove flame is too high, the most likely cause is an improperly adjusted burner air mixture, although many newer ranges use fixed air shutters that cannot be adjusted. Next, check the burner cap. A cap that is misplaced, warped, or damaged can create a high or uneven gas stove flame. Turn off the Dynasty gas stove and let the cooktop cool before reseating or replacing the cap. If all burners have high flames, the pressure regulator may be adjusted incorrectly or set for the wrong gas type. A qualified technician should test, adjust, or replace the gas regulator. A wrong orifice can also allow too much gas into a burner, so verify that each burner has the correct orifice for natural gas or LP gas. A damaged surface burner cap or burner base may need replacement as well. These checks address common gas stove flame adjustment problems and a gas burner flame too high condition. Enter your Dynasty range model number to find the exact replacement burner cap, pressure regulator, orifice, or other part that fits your appliance. Always confirm the gas supply is off before servicing gas components.
01 - Burner Air Mixture Not Adjusted Properly
Some burners have an adjustable air shutter just before the orifice. If the air shutter is not adjusted properly, the flame will hiss from too much air or too little air will result in a lazy high flame. Most newer ranges have fixed air shutters that are not adjustable.
Top Solution
02 - Burner cap not on properly
Since burner caps help distribute the gas evenly around the burner, a burner cap that is not positioned correctly on the burner base can cause the burner not to heat properly. Confirm the appliance is turned off and the stovetop is cool to the touch, then readjust the burner cap, if necessary, so it is seated properly on the burner base. If the cap is damaged or warped, the flame can be higher on one side than the other. Inspect the burner cap for damage; a damaged burner cap will likely need to be replaced.
Common
03 - Dynasty Range/Stove/Oven Pressure Regulator
A pressure regulator is needed on a gas range to keep the pressure constant. If the pressure regulator is not adjusted properly, or is set for the wrong type of gas, the flames can be too high. This will affect all the burners. If you suspect the regulator is bad or not adjusted properly it is best to have a qualified technician check, adjust, or replace the regulator if needed.
Enter model number to search for the required part specific to your product
Common
04 - Wrong Orifice Installed
To work properly all burners need the correct orifice for the type of gas that is being used. If the burner flame is too high, either the gas pressure is too high or the orifice is too large. Check the parts diagram or the installation instructions for the proper burner orifice.
Common
05 - Dynasty Range/Stove/Oven Orifice
All orifices are drilled and numbered according to the size of the hole. If the wrong orifice was installed in a burner, the flame can be too high. Make sure the correct orifice is installed in the burner.
Less Common
06 - Dynasty Range/Stove/Oven Surface Burner Cap
A surface burner cap needs to be seated flat on the burner base for the flame to be evenly distributed. If a burner cap is tilted, the flames will be higher on one side than the other. If the cap is damaged, it will need to be replaced.
Uncommon But Possible
Frequently Asked Questions
Why is my Dynasty gas stove flame too high?
How do I adjust the flame on my Dynasty gas stove?
Can a burner cap or orifice cause a gas stove flame to be too high?
When should I call a technician for a Dynasty gas stove flame adjustment?
How do I find the correct Dynasty burner cap, orifice, or pressure regulator?
Shop by Popular Dynasty Range/Stove/Oven Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com