Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpLitton Oven RepairLitton Gas Stove burner flames too high Repair
Litton Gas Stove burner flames too high
When your Litton gas stove flame is too high, start with the burner air mixture, then check the burner cap, pressure regulator, and burner orifice. An air shutter that is adjusted incorrectly can allow too much air or too little air, causing a noisy flame or a lazy, unusually high flame, although many newer gas stoves use fixed air shutters. A burner cap that is not seated correctly can also create a gas stove flame too high on one side. Turn off the Litton gas stove, let the cooktop cool, and reposition the cap on the burner base. Replace a warped or damaged surface burner cap. If all burners are affected, the pressure regulator may be set incorrectly, adjusted improperly, or configured for the wrong gas type. Have a qualified technician inspect or replace the regulator. A wrong orifice, or an orifice drilled too large for the gas type, can also cause a gas burner flame too high. Check the parts diagram or installation instructions before replacing it. Enter your Litton model number to find the exact pressure regulator, orifice, or burner cap for your gas stove.
01 - Burner Air Mixture Not Adjusted Properly
Some burners have an adjustable air shutter just before the orifice. If the air shutter is not adjusted properly, the flame will hiss from too much air or too little air will result in a lazy high flame. Most newer ranges have fixed air shutters that are not adjustable.
Top Solution
02 - Burner cap not on properly
Since burner caps help distribute the gas evenly around the burner, a burner cap that is not positioned correctly on the burner base can cause the burner not to heat properly. Confirm the appliance is turned off and the stovetop is cool to the touch, then readjust the burner cap, if necessary, so it is seated properly on the burner base. If the cap is damaged or warped, the flame can be higher on one side than the other. Inspect the burner cap for damage; a damaged burner cap will likely need to be replaced.
Common
03 - Litton Range/Stove/Oven Pressure Regulator
A pressure regulator is needed on a gas range to keep the pressure constant. If the pressure regulator is not adjusted properly, or is set for the wrong type of gas, the flames can be too high. This will affect all the burners. If you suspect the regulator is bad or not adjusted properly it is best to have a qualified technician check, adjust, or replace the regulator if needed.
Enter model number to search for the required part specific to your product
Common
04 - Wrong Orifice Installed
To work properly all burners need the correct orifice for the type of gas that is being used. If the burner flame is too high, either the gas pressure is too high or the orifice is too large. Check the parts diagram or the installation instructions for the proper burner orifice.
Common
05 - Litton Range/Stove/Oven Orifice
All orifices are drilled and numbered according to the size of the hole. If the wrong orifice was installed in a burner, the flame can be too high. Make sure the correct orifice is installed in the burner.
Less Common
06 - Litton Range/Stove/Oven Surface Burner Cap
A surface burner cap needs to be seated flat on the burner base for the flame to be evenly distributed. If a burner cap is tilted, the flames will be higher on one side than the other. If the cap is damaged, it will need to be replaced.
Uncommon But Possible
Frequently Asked Questions
Why is my Litton gas stove flame too high?
How do I adjust the flame on my Litton gas stove?
Why is one Litton gas burner flame too high on one side?
Why are all the flames too high on my Litton gas stove?
How do I find the correct Litton gas stove burner cap, orifice, or pressure regulator?
Shop by Popular Litton Range/Stove/Oven Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com