Choose Product
Identify Problem
03
Find Solutions

Amana Range making a loud noise

When your Amana range is making a loud noise, the fan blade is the most likely cause. A bent blade or blade sliding on the shaft can rub against the housing and create oven fan noise, rattling, or humming. Inspect the blade for damage and replace it if needed. If you hear a sudden whoosh from a burner, a faulty spark ignition switch or spark ignition switch and harness may be allowing gas to build up before ignition. Test the switch for continuity with a multimeter. A range igniter that is weak or slow to light can also cause a small boom in the oven or a whoosh at the burner. If the igniter glows for more than 90 seconds without lighting the gas, or has no continuity, replace it. A worn fan motor can make an Amana oven making noise because of bad bearings or a damaged blower. Finally, a failing convection motor can rattle or allow the convection fan to hit the housing. Enter your model number to find the exact fan blade, fan motor, spark ignition switch, harness, igniter, or convection motor for your Amana range.

01 - Amana Range/Stove/Oven Fan Blade

The fan blade may be bent or sliding on the shaft and rubbing on the housing. Inspect the fan blade. If the fan blade is bent or damaged it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Amana Range/Stove/Oven Spark Ignition Switch

If the gas is not lighting correctly, it can build up and flash, causing a “whoosh” noise on the burner. This can potentially be caused by a faulty spark ignition switch only working intermittently. You can use a multimeter to test the spark ignition switch or switches for electrical continuity to determine if the component is functioning normally.
Top Solution

03 - Amana Range/Stove/Oven Spark Ignition Switch and Harness

If the gas is not lighting correctly, it can build up and flash, causing a “whoosh” noise on the burner. This can potentially be caused by a faulty spark ignition switch and harness only working intermittently. You can use a multimeter to test the spark ignition switches for electrical continuity to determine if the assembly is functioning normally.
Top Solution

04 - Amana Range/Stove/Oven Fan Motor

The fan motor turns the fan blade to circulate the air. The fan motor is often sold as an assembly. If the fan motor bearings are bad, or the fan blade or blower is damaged, the fan motor will need to be replaced.
Highly Likely

05 - Amana Range/Stove/Oven Igniter

If the gas is not being ignited promptly, it can build up and flash causing a small "boom" noise in the oven or a "whoosh" noise on the burner. A faulty igniter could be the cause of the gas not igniting promptly. To determine if the igniter is defective, observe the igniter when the oven is on. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. If the igniter is weak, replace it. If the igniter does not glow at all, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.
Highly Likely

06 - Amana Range/Stove/Oven Convection Motor

The convection motor drives the convection fan to circulate the air inside the oven. The convection oven must circulate the air for the oven to heat evenly. If the motor bearings are bad the motor may rattle or the fan may hit the housing. If the convection fan motor shaft wobbles, or the motor is making a loud noise, replace the convection motor.
Common

Frequently Asked Questions

Why is my Amana range making a loud noise?
Why is my Amana oven fan making noise?
Why does my Amana gas range make a whoosh or boom when the burner or oven ignites?
How do I know whether the Amana oven igniter is causing the loud noise?
How do I find the correct replacement fan blade or motor for my Amana range?