Choose Product
Identify Problem
03
Find Solutions

Garland Range making a loud noise

Is your Garland range making a loud noise? Start with the fan blade, which may be bent, damaged, or slipping on the shaft and rubbing against the housing. A faulty spark ignition switch, or the spark ignition switch and harness, can also cause a sudden "whoosh" when gas builds up before lighting. Test the switch for electrical continuity with a multimeter. A worn fan motor is another common source of oven fan noise, especially if its bearings are failing or the blade or blower is damaged. If the oven makes a small "boom" during ignition, inspect the igniter. An igniter that glows for more than 90 seconds without lighting the gas may be too weak to open the valve, while an igniter with no continuity should be replaced. Finally, a failing convection motor can rattle or allow the convection fan to hit the housing. Inspect the fan blade, ignition components, fan motor, igniter, and convection motor before ordering parts. Enter your Garland range model number to find the exact replacement part for your specific range.

01 - Garland Range/Stove/Oven Fan Blade

The fan blade may be bent or sliding on the shaft and rubbing on the housing. Inspect the fan blade. If the fan blade is bent or damaged it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Garland Range/Stove/Oven Spark Ignition Switch

If the gas is not lighting correctly, it can build up and flash, causing a “whoosh” noise on the burner. This can potentially be caused by a faulty spark ignition switch only working intermittently. You can use a multimeter to test the spark ignition switch or switches for electrical continuity to determine if the component is functioning normally.
Top Solution

03 - Garland Range/Stove/Oven Spark Ignition Switch and Harness

If the gas is not lighting correctly, it can build up and flash, causing a “whoosh” noise on the burner. This can potentially be caused by a faulty spark ignition switch and harness only working intermittently. You can use a multimeter to test the spark ignition switches for electrical continuity to determine if the assembly is functioning normally.
Top Solution

04 - Garland Range/Stove/Oven Fan Motor

The fan motor turns the fan blade to circulate the air. The fan motor is often sold as an assembly. If the fan motor bearings are bad, or the fan blade or blower is damaged, the fan motor will need to be replaced.
Highly Likely

05 - Garland Range/Stove/Oven Igniter

If the gas is not being ignited promptly, it can build up and flash causing a small "boom" noise in the oven or a "whoosh" noise on the burner. A faulty igniter could be the cause of the gas not igniting promptly. To determine if the igniter is defective, observe the igniter when the oven is on. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. If the igniter is weak, replace it. If the igniter does not glow at all, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.
Highly Likely

06 - Garland Range/Stove/Oven Convection Motor

The convection motor drives the convection fan to circulate the air inside the oven. The convection oven must circulate the air for the oven to heat evenly. If the motor bearings are bad the motor may rattle or the fan may hit the housing. If the convection fan motor shaft wobbles, or the motor is making a loud noise, replace the convection motor.
Common

Frequently Asked Questions

Why is my Garland range making a loud noise?
Why is my Garland oven fan making noise?
What causes a whoosh or boom noise from a Garland gas range?
How do I test a Garland spark ignition switch and harness?
How do I find the correct fan blade, motor, or igniter for my Garland range?