Roper Stove turns off on its own

When your Roper stove turns off by itself, start by checking whether the touchpad buttons respond intermittently or not at all. A faulty touchpad is the most likely cause and should be replaced if it is not registering commands consistently. Next, inspect the electric range power cord and terminal block for loose or burnt connections. Overheated terminals can melt wire insulation and interrupt power, so replace damaged connectors, the terminal block, or the power cord, and have the receptacle checked by a licensed electrician if needed. If a surface element starts working again after you turn its control off and back on or select another heat setting, the control board may be failing. Loose, broken, or burned wire connectors can also cause intermittent power loss. Less commonly, a failed relay board can stop sending power to the heating elements and other components, while a defective main control board can shut down the entire Roper stove. Disconnect power before inspecting wiring. Enter your model number to find the exact replacement touchpad, power cord, terminal block, control board, relay board, or wire connector for your Roper range.

01 - Roper Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Roper Range/Stove/Oven Touchpad Parts

02 - Roper Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.

Shop all Roper Range/Stove/Oven Power Cord Parts

03 - Roper Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.

Shop all Roper Range/Stove/Oven Control Board Parts

Common

04 - Roper Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.

Shop all Roper Range/Stove/Oven Wire Connector Parts

Common

05 - Roper Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.

Shop all Roper Range/Stove/Oven Relay Board Parts

Less Common

06 - Roper Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.

Shop all Roper Range/Stove/Oven Main Control Board Parts

Less Common

Frequently Asked Questions

Why does my Roper stove turn off by itself?

Can a damaged power cord cause my Roper electric range to shut off?

Why does my Roper stove surface element shut off and then start working again?

Could the control board or relay board make my Roper stove turn off on its own?

How do I find the correct replacement part for my Roper stove?

Shop by Popular Roper Range/Stove/Oven Models

Talk With Us

We can help you check an order, track a package, start a return, and more.

START A CHAT

Talk With Us

We can help you check an order, track a package, start a return, and more.

Join Repair Clinic's VIP email list for 10% off, plus other discounts and tips!

Our Story

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.

About Repair Clinic

Customer Stories Repair Parts BrandsDIY Repair Blog In the News