Choose Product
Identify Problem
03
Find Solutions

Universal Stove turns off on its own

If your Universal stove turns off by itself, the touchpad is the most likely cause, especially when some buttons respond intermittently or not at all. A faulty touchpad can make the controls stop responding and shut down the range unexpectedly. Next, inspect the power cord and terminal block on an electric range. Loose or burnt connections can overheat, melt wire insulation, and cause intermittent power loss. If a surface element starts working again after you turn its dial off and back on or select another heat setting, the control board may be failing. Loose, damaged, or burnt wire connectors can also interrupt power, so inspect the wiring from the power cord for breaks or burn marks. Less commonly, a failed relay board can shut off the oven or other stove components, while a defective main control board can stop sending power throughout the appliance. Disconnect power before inspecting electrical parts, and replace damaged components rather than using the stove. Enter your model number to find the exact touchpad, power cord, terminal block, wire connector, relay board, or control board for your Universal range, stove, or oven.

01 - Universal Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Universal Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.
Top Solution

03 - Universal Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.
Common

04 - Universal Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.
Common

05 - Universal Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.
Less Common

06 - Universal Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common

Frequently Asked Questions

Why does my Universal stove turn off by itself?
Can a loose power cord cause an electric stove to turn off by itself?
Why does my stove surface element stop working until I turn the dial off and back on?
Could a relay board or main control board make a stove shut off on its own?
How do I find the correct replacement part for my Universal stove?