Dynasty Stove turns off on its own

When your Dynasty stove turns off by itself, the touchpad is the most likely cause, especially when some buttons respond intermittently or do not respond at all. A faulty Dynasty range/stove/oven touchpad can interrupt operation and should be replaced. On an electric range, also inspect the power cord, terminal block, and power cord connectors for loose, burnt, or melted connections. A damaged terminal block or power cord can cause an electric stove to turn off by itself and may require inspection of the wall receptacle by a licensed electrician. If a surface element starts working after you turn its control off and back on or select another heat setting, the range control board may be failing. Check the power connections first, then inspect the wire connectors and wire harness for loose connections, breaks, or burn marks. Less common causes include a failed relay board or main control board, which can interrupt power to the heating elements and other components. Always disconnect power before inspecting wiring. Enter your Dynasty range, stove, or oven model number to find the exact replacement part for your appliance.

01 - Dynasty Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Dynasty Range/Stove/Oven Touchpad Parts

02 - Dynasty Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.

Shop all Dynasty Range/Stove/Oven Power Cord Parts

03 - Dynasty Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.

Shop all Dynasty Range/Stove/Oven Control Board Parts

Common

04 - Dynasty Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.

Shop all Dynasty Range/Stove/Oven Wire Connector Parts

Common

05 - Dynasty Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.

Shop all Dynasty Range/Stove/Oven Relay Board Parts

Less Common

06 - Dynasty Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.

Shop all Dynasty Range/Stove/Oven Main Control Board Parts

Less Common

Frequently Asked Questions

Why does my Dynasty stove turn off by itself?

Can a loose power cord make an electric Dynasty range turn off?

How do I know if the Dynasty stove touchpad is bad?

Could a control board or relay board cause my Dynasty stove to shut off?

How do I find the correct replacement part for my Dynasty stove?

Shop by Popular Dynasty Range/Stove/Oven Models

Talk With Us

We can help you check an order, track a package, start a return, and more.

START A CHAT

Talk With Us

We can help you check an order, track a package, start a return, and more.

Join Repair Clinic's VIP email list for 10% off, plus other discounts and tips!

Our Story

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.

About Repair Clinic

Customer Stories Repair Parts BrandsDIY Repair Blog In the News