GE Stove turns off on its own

When your GE stove turns off by itself, the touchpad is the most likely cause, especially when buttons respond intermittently or do not respond at all. Replace the GE range touchpad if cycling the controls does not restore normal operation. On an electric GE range, inspect the power cord connections at the terminal block next. Loose or burnt connections can interrupt power, overheat, or melt the wire insulation. A damaged terminal block, power cord, or receptacle needs prompt attention, and receptacle repairs should be handled by a licensed electrician. If a surface element works again after turning its control off and back on or selecting another heat setting, the control board may be failing. Next, check the wire harness and wire connectors for loose connections, breaks, or burn marks that can cause intermittent power loss. Less common causes include a failed relay board, which controls current to heating components, or a defective main control board with loose or damaged connections. These checks can help identify why your GE stove keeps shutting off. Enter your model number to find the exact replacement part for your specific GE range, stove, or oven.

01 - GE Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all GE Range/Stove/Oven Touchpad Parts

02 - GE Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.

Shop all GE Range/Stove/Oven Power Cord Parts

03 - GE Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.

Shop all GE Range/Stove/Oven Control Board Parts

Common

04 - GE Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.

Shop all GE Range/Stove/Oven Wire Connector Parts

Common

05 - GE Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.

Shop all GE Range/Stove/Oven Relay Board Parts

Less Common

06 - GE Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.

Shop all GE Range/Stove/Oven Main Control Board Parts

Less Common

Frequently Asked Questions

Why does my GE stove turn off by itself?

Can a GE range power cord or terminal block cause the stove to shut off?

Could the GE stove touchpad or control panel be causing the problem?

Should I replace the GE stove control board when it turns off by itself?

How do I find the correct GE stove replacement part?

Talk With Us

We can help you check an order, track a package, start a return, and more.

START A CHAT

Talk With Us

We can help you check an order, track a package, start a return, and more.

Join Repair Clinic's VIP email list for 10% off, plus other discounts and tips!

Our Story

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.

About Repair Clinic

Customer Stories Repair Parts BrandsDIY Repair Blog In the News