Choose Product
Identify Problem
03
Find Solutions

Inglis Stove turns off on its own

When your Inglis stove turns off by itself, start by checking whether the touchpad buttons respond intermittently or not at all. A faulty touchpad is the most likely cause and should be replaced. Next, inspect the electric range power cord connections at the terminal block. Loose or burnt connectors can overheat, melt wire insulation, and cause the electric stove to turn off by itself. Replace damaged terminal block or power cord parts, and have a licensed electrician inspect a burned receptacle. If a surface element starts working again after turning its control off and back on or selecting another heat setting, the control board may be failing. Also inspect the wire connectors and wire harness, especially near the main power cord, for loose connections, breaks, or burn marks. Less commonly, a failed relay board can interrupt power to the heating elements or other stove components. A defective main control board can also shut down the entire stove. Disconnect power before testing or repairing electrical parts. Enter your Inglis stove model number to find the exact replacement touchpad, terminal block, control board, wire connector, relay board, or main control board for your range.

01 - Inglis Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Inglis Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.
Top Solution

03 - Inglis Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.
Common

04 - Inglis Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.
Common

05 - Inglis Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.
Less Common

06 - Inglis Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common

Frequently Asked Questions

Why does my Inglis stove turn off by itself?
Can a bad power cord or terminal block make an electric stove shut off?
What should I check if my stove controls are not working before replacing the control board?
Could a relay board or main control board cause my Inglis stove to turn off on its own?
How do I find the correct Inglis stove replacement part?