Choose Product
Identify Problem
03
Find Solutions

Ikea Stove turns off on its own

When your Ikea stove turns off by itself, the touchpad is the most likely cause, especially when buttons respond intermittently or stop responding. A faulty touchpad can interrupt stove operation and should be replaced. Next, inspect the electric range power cord and terminal block for loose, overheated, or burnt connections. Damaged terminal block connectors, cord terminals, or power cord prongs can cause intermittent power loss and may require replacement. If a surface element starts working again after turning its dial off and on or selecting another heat setting, the range control board may be failing. Check the power cord and terminal block before replacing the board. Loose or damaged wire connectors can also make an Ikea stove turn off by itself, so inspect wiring for breaks and burn marks. Less common causes include a failed relay board, which controls power to heating components, or a defective main control board that distributes power throughout the stove. Disconnect power before testing or repairing electrical parts, and have a licensed electrician handle damaged receptacles. Enter your Ikea model number to find the exact replacement part for your stove.

01 - Ikea Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Ikea Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.
Top Solution

03 - Ikea Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.
Common

04 - Ikea Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.
Common

05 - Ikea Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.
Less Common

06 - Ikea Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common

Frequently Asked Questions

Why does my Ikea stove turn off by itself?
Can a faulty touchpad make an Ikea stove turn off on its own?
Could the power cord or terminal block cause my Ikea stove to shut off?
Should I replace the Ikea stove control board if it keeps turning off?
How do I find the correct replacement part for my Ikea stove?