Choose Product
Identify Problem
03
Find Solutions

Modern Maid Stove turns off on its own

If your Modern Maid stove turns off by itself, start by checking the touchpad. Buttons that respond intermittently or not at all usually indicate a faulty touchpad that needs replacement. On an electric range, inspect the power cord and terminal block next. Loose or burnt connections can interrupt power, overheat, or melt the wire insulation. Replace damaged terminal block connectors or the power cord, and have the receptacle checked by a licensed electrician if the cord prongs are burnt. If a surface element starts working again after you turn its dial off and back on or select another heat setting, the control board may be failing. Check the power cord, terminal block, and element control before replacing the board. Loose, broken, or burned wire connectors can also cause intermittent power loss. Less commonly, a failed relay board can shut off the stove, or a defective main control board can stop sending power to the appliance. Always disconnect power before inspecting wiring. Enter your Modern Maid stove's model number to find the exact replacement touchpad, control board, relay board, power cord, or other part for your range.

01 - Modern Maid Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Modern Maid Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.
Top Solution

03 - Modern Maid Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.
Common

04 - Modern Maid Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.
Common

05 - Modern Maid Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.
Less Common

06 - Modern Maid Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.
Less Common

Frequently Asked Questions

Why does my Modern Maid stove turn off by itself?
Can a loose power cord cause my electric stove to turn off?
How do I test a Modern Maid stove that keeps shutting off?
Could the touchpad or control board cause my Modern Maid stove to shut off?
How do I find the correct Modern Maid stove replacement part?