Gibson Stove turns off on its own

If your Gibson stove turns off by itself, start by checking the touchpad. Buttons that respond intermittently or do not respond at all usually indicate a faulty touchpad that needs replacement. On an electric Gibson range, inspect the power cord connections at the terminal block next. Loose or burnt connections can overheat, melt wire insulation, and cause the stove to shut off. Replace damaged terminal block or power cord parts, and have a licensed electrician inspect a damaged receptacle. If a surface element starts working again after turning its control off and back on or selecting another setting, the control board may be failing. Loose or damaged wire connectors, especially near the main power cord, can also cause intermittent power loss. Less commonly, a failed relay board can interrupt power to the heating elements and other components, while a defective main control board can shut down the entire range. Disconnect power before inspecting wiring, and repair burnt or broken connections before replacing electronic parts. Enter your Gibson model number to find the exact touchpad, power cord, terminal block, wire connector, control board, relay board, or main control board for your range.

01 - Gibson Range/Stove/Oven Touchpad

If a stove turns off on its own, determine if some of the buttons on the touchpad respond intermittently or not at all. If so, it's likely the touchpad is faulty and should be replaced.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Gibson Range/Stove/Oven Touchpad Parts

02 - Gibson Range/Stove/Oven Power Cord

If the power cord connections in the terminal block on your electric range are not secure the wire can overheat, burning the connections on the terminal block, and melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the terminal block connectors are burnt, the terminal block should be replaced. If the power cord terminal connectors are burnt or damaged, the power cord should be replaced. If the power cord prongs are burnt, a new power cord should be installed and the receptacle checked and replaced if necessary by a licenced electrician.

Shop all Gibson Range/Stove/Oven Power Cord Parts

03 - Gibson Range/Stove/Oven Control Board

If the stove surface element starts working again when the surface element dial or control is turned off and back on or to a different heat setting, it's likely that the control board is the cause of the stove turning off on its own. You should confirm that the surface element control is functioning normally and the appliance's power cord and terminal block are in good condition before considering a control board replacement.

Shop all Gibson Range/Stove/Oven Control Board Parts

Common

04 - Gibson Range/Stove/Oven Wire Connector

Inspect the wiring and connectors, especially coming from the main power cord. A loose connection can cause intermittent power failure. Inspect the wiring for breaks or burn marks. Repair wiring as needed.

Shop all Gibson Range/Stove/Oven Wire Connector Parts

Common

05 - Gibson Range/Stove/Oven Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the electrical current to the heating element, and other components of the stove. If one or more of the relays on the relay board has failed, the oven may shut off. If the relay board is defective, replace it.

Shop all Gibson Range/Stove/Oven Relay Board Parts

Less Common

06 - Gibson Range/Stove/Oven Main Control Board

The main control board sends power to all the components in the stove. If the control board connections are loose, or burnt, or the control board is turning off on its own, one of the relays or other components may be bad and the control will need to be replaced.

Shop all Gibson Range/Stove/Oven Main Control Board Parts

Less Common

Frequently Asked Questions

Why does my Gibson stove turn off by itself?

Can a loose power cord cause an electric Gibson range to shut off?

How do I know if the Gibson stove touchpad is bad?

Could the control board or relay board be causing my stove to turn off?

How do I find the correct replacement part for my Gibson stove?

Shop by Popular Gibson Range/Stove/Oven Models

Talk With Us

We can help you check an order, track a package, start a return, and more.

START A CHAT

Talk With Us

We can help you check an order, track a package, start a return, and more.

Join Repair Clinic's VIP email list for 10% off, plus other discounts and tips!

Our Story

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.

About Repair Clinic

Customer Stories Repair Parts BrandsDIY Repair Blog In the News