An Ikea range vent hood lights are not working, start with the light assembly, especially if the bulb is not sold separately for your model. The next most likely cause is a burned-out light bulb or halogen lamp. Replace the bulb first when possible, or test the halogen lamp for continuity with a multimeter if the failure is not visible. If a new bulb does not restore the light, check the light socket for incoming power. A socket that has power but will not light the bulb is defective and should be replaced. Less commonly, the light switch or push button switch may have failed. Test either switch for continuity with a multimeter and replace it if it does not complete the circuit. These steps address common IKEA range vent hood light problems, including a vent hood light that is out or will not turn on. Enter your IKEA range vent hood model number to find the exact replacement light assembly, light bulb, halogen lamp, socket, light switch, or push button switch for your specific appliance. Always disconnect power before testing or replacing parts.
01 - Ikea Range Vent Hood Light Assembly
If the vent hood light is burned out, replace it. Some manufacturers do not sell the light bulb as an individual part; instead, they require you to purchase the light assembly.
Enter model number to search for the required part specific to your product
One or more of the halogen lamp bulbs may be burned out. Since it’s very difficult to visually determine if any of the halogen lamps have burned out, use a multimeter to test them for continuity. Alternatively, you can just try replacing the bulbs.
To determine if the light socket is defective, use a multimeter to test the incoming power to the socket. If the light socket has power, but the light bulb isn’t working, replace the light socket.
To determine if the light switch is defective, use a multimeter to test the switch for continuity. If the light switch does not have continuity, replace it.
To determine if the push button switch is defective, use a multimeter to test the switch for continuity. If the push button switch does not have continuity, replace it