Choose Product
Identify Problem
03
Find Solutions

Dacor Range vent hood touchpad doesn't work

When your Dacor range vent hood touchpad doesn't work, the touchpad itself is the most likely cause, especially when some buttons respond but others do not. This is a common reason for a Dacor vent hood touchpad not working or the control panel not responding. If none of the buttons work, the user control and display board or main control board may be defective. Before replacing a board, verify that the vent hood is receiving power. Check whether the circuit breaker has tripped, or test an accessible wall outlet with another small appliance. Hardwired connections may require removing the cover panel, so disconnect power before servicing and use caution. If power reaches the board and the buttons still do not respond, the Dacor range vent hood control board may need replacement. When the touchpad and control board are separate, replacing both may provide a more reliable repair. Enter your model number to find the exact touchpad, user control and display board, main control board, or other replacement part made for your Dacor range vent hood.

01 - Dacor Range Vent Hood Touchpad

To determine if the touchpad is defective, try pressing some of the keypad buttons. If some of the keypad buttons work, while other buttons do not work, the touchpad might be at fault.
Enter model number to search for the required part specific to your product
Top Solution

02 - Dacor Range Vent Hood User Control and Display Board

The user control and display board may be defective. Control boards are often misdiagnosed—before replacing the user control and display board, first check all of the more commonly defective parts.
Top Solution

03 - Dacor Range Vent Hood Main Control Board

The main control board may be defective. To determine if the touchpad is defective, try pressing some of the keypad buttons. If some of the keypad buttons work while other buttons do not work at all, the keypad is likely defective. If none of the keypad buttons work, the main control board may be defective.
Top Solution

04 - Incoming Power Problem

Vent hoods are typically hardwired to the circuit breaker box, but they can also be plugged into a wall outlet behind the cover panel. In either case, it may be difficult to test the incoming power to the vent hood without removing a large cover panel. If the unit is plugged into an accessible wall outlet you can plug another small appliance into the outlet to confirm there is power. If you cannot access the incoming power connection easily, confirm the circuit breaker suppling power to the vent hood has not tripped.
Less Common

05 - Dacor Range Vent Hood Control Board

Most range vent hood control boards have the buttons attached to the board. If you've determined that power is reaching the board, then it's likely the control board is defective and will need to be replaced. If there is a separate touchpad, it would be a good idea to replace both the control board and touchpad at the same time.
Uncommon But Possible

Frequently Asked Questions

Why is my Dacor range vent hood touchpad not working?
What should I check if some Dacor range vent hood buttons work but others do not?
What if none of the Dacor range vent hood controls work?
How can I tell whether the touchpad or control board is bad on my Dacor range vent hood?
How do I find the correct Dacor range vent hood touchpad or control board?

Shop by Dacor Range Vent Hood Parts