Electrolux Range vent hood doesn't vent to the outside
When an Electrolux range vent hood doesn't vent to the outside, start with the blower motor, the most likely cause. Turn on the vent hood and check whether the fan blade spins. If the motor is not receiving power, test the switch for continuity. If power reaches the blower motor but it still will not turn, replace the motor. A restricted or damaged blower wheel and housing can also reduce airflow. With power disconnected, spin the blower wheel by hand and check for grease, debris, or rubbing against the housing. If it does not spin freely after removing obstructions, replace the blower wheel or housing. Next, check that the fan blade is tight on the motor shaft. A loose blade may need tightening or replacement. A clogged grease filter is another common reason an Electrolux range vent hood is not venting correctly. Clean the filter with degreaser and warm, soapy water, or replace it if it remains dirty or is damaged. Enter your model number to find the exact replacement blower motor, blower wheel, fan blade, or grease filter for your specific Electrolux range vent hood.
01 - Electrolux Range Vent Hood Blower Motor
To determine if the blower motor is defective, turn on the vent hood and check to see if the fan blade is spinning. If the fan blade does not spin, ensure that power is getting to the motor. If power is not getting to the motor, test the switch for continuity. If the motor is receiving power, but the motor won’t turn, replace the blower motor.
Enter model number to search for the required part specific to your product
02 - Electrolux Range Vent Hood Blower Wheel and Housing
One possibility is that something is caught in the blower wheel. It is also possible that the blower wheel is rubbing against the blower housing. To determine if the blower wheel is at fault, try spinning the blower fan by hand. If the blower wheel does not spin freely, check for the blower wheel for obstructions. In addition, ensure that the blower wheel is not rubbing against the blower housing. If the blower wheel is clear of obstructions, but it still doesn’t spin freely, replace the blower wheel and housing.
One possibility is that something is caught in the blower wheel. It is also possible that the blower wheel is rubbing against the blower housing. To determine if the blower wheel is at fault, try spinning the blower fan by hand. If the blower wheel does not spin freely, check for the blower wheel for obstructions. In addition, ensure that the blower wheel is not rubbing against the blower housing. If the blower wheel is clear of obstructions, but it still doesn’t spin freely, replace the blower wheel.
Check to see if the fan blade is still tightly fastened to the motor shaft. If the blade is loose, try to tighten it. If the blade cannot be properly tightened, replace it.
If the range hood is not venting correctly, the grease filter(s) may be clogged. If a filter is very dirty it can be cleaned. Remove it and soak it in a degreasing solution until the grease is dissolved. Next, wash it with warm, soapy water to remove any traces of the degreaser. If the filter does not come clean or is damaged, replace it.
Highly Likely
06 - Electrolux Range Vent Hood Grease Filter
If the range hood is not venting correctly check out the grease filter(s). If the filter is very dirty it can be cleaned. Remove it and soak it in a degreasing solution until the grease is dissolved. Next, wash it with warm, soapy water to remove any traces of the degreaser. If the filter does not come clean or is damaged, replace it.