Choose Product
Identify Problem
03
Find Solutions

Ikea Range vent hood doesn't vent to the outside

When your Ikea range vent hood doesn't vent to the outside, the blower motor is the most likely cause. Turn on the hood and check whether the fan blade spins. If it does not, verify that the motor is receiving power and test the switch for continuity. Replace the blower motor if it has power but will not run. If the motor operates, inspect the blower wheel and housing for grease, debris, or rubbing that prevents the wheel from spinning freely. A damaged blower wheel and housing or blower wheel may need replacement. Next, check that the fan blade is tight on the motor shaft. A loose blade can prevent the hood from moving air and should be tightened or replaced if it will not stay secure. A clogged grease filter is another common reason an Ikea range vent hood is not venting correctly. Clean the filter with degreaser and warm, soapy water, or replace it if it remains dirty or is damaged. Enter your model number to find the exact blower motor, blower wheel, fan blade, or grease filter for your specific Ikea range vent hood.

01 - Ikea Range Vent Hood Blower Motor

To determine if the blower motor is defective, turn on the vent hood and check to see if the fan blade is spinning. If the fan blade does not spin, ensure that power is getting to the motor. If power is not getting to the motor, test the switch for continuity. If the motor is receiving power, but the motor won’t turn, replace the blower motor.
Enter model number to search for the required part specific to your product
Top Solution

02 - Ikea Range Vent Hood Blower Wheel and Housing

One possibility is that something is caught in the blower wheel. It is also possible that the blower wheel is rubbing against the blower housing. To determine if the blower wheel is at fault, try spinning the blower fan by hand. If the blower wheel does not spin freely, check for the blower wheel for obstructions. In addition, ensure that the blower wheel is not rubbing against the blower housing. If the blower wheel is clear of obstructions, but it still doesn’t spin freely, replace the blower wheel and housing.
Top Solution

03 - Ikea Range Vent Hood Blower Wheel

One possibility is that something is caught in the blower wheel. It is also possible that the blower wheel is rubbing against the blower housing. To determine if the blower wheel is at fault, try spinning the blower fan by hand. If the blower wheel does not spin freely, check for the blower wheel for obstructions. In addition, ensure that the blower wheel is not rubbing against the blower housing. If the blower wheel is clear of obstructions, but it still doesn’t spin freely, replace the blower wheel.
Top Solution

04 - Ikea Range Vent Hood Fan Blade

Check to see if the fan blade is still tightly fastened to the motor shaft. If the blade is loose, try to tighten it. If the blade cannot be properly tightened, replace it.
Top Solution

05 - Filter is Clogged

If the range hood is not venting correctly, the grease filter(s) may be clogged. If a filter is very dirty it can be cleaned. Remove it and soak it in a degreasing solution until the grease is dissolved. Next, wash it with warm, soapy water to remove any traces of the degreaser. If the filter does not come clean or is damaged, replace it.
Highly Likely

06 - Ikea Range Vent Hood Grease Filter

If the range hood is not venting correctly check out the grease filter(s). If the filter is very dirty it can be cleaned. Remove it and soak it in a degreasing solution until the grease is dissolved. Next, wash it with warm, soapy water to remove any traces of the degreaser. If the filter does not come clean or is damaged, replace it.
Common

Frequently Asked Questions

Why isn't my IKEA range vent hood venting to the outside?
How do I know if the IKEA range vent hood blower motor is bad?
What should I check if my range hood blower wheel is not spinning freely?
Why is my IKEA range vent hood fan blade loose or not moving air?
How do I find the correct replacement part for my IKEA range vent hood?