Inglis Refrigerator freezer door or drawer not opening/closing properly
If a freezer door or drawer on your Inglis fridge won't close, sticks, or leaves the compartment open, the problem is most often mechanical alignment instead of a cooling fault. Start by checking the door hinge for bends, broken pins, or loose mounting screws— a damaged or bent hinge is the most common cause of a freezer door not closing. Next inspect the door stop for wear or broken stops that let the door over-rotate. If the door sags or sits uneven, check the bottom, top, and center hinges in that order for wear or damage; replacing a bent hinge or installing a door hinge kit usually restores correct alignment and sealing. While you’re at it, look for stripped screw holes, missing shims, or simple fastener tightening that will return proper clearance and let the gasket seat so the fridge door seals. If you need a replacement, enter your model number on RepairClinic.com to see exact hinge, stop, and hinge kit parts that fit your refrigerator.
01 - Inglis Refrigerator Door Hinge
A damaged or bent door hinge could cause the freezer door to be misaligned and not close properly. Inspect the hinge for defects and replace if necessary.
Enter model number to search for the required part specific to your product
A damaged or bent center hinge could cause the freezer door to be misaligned and not close properly. Inspect the hinge for defects and replace if necessary.
A damaged or bent door hinge could cause the freezer door to be misaligned and not close properly. Inspect the hinge for defects and install new door hinge kit components if necessary.