Choose Product
Identify Problem
03
Find Solutions

Tappan Refrigerator freezer door or drawer not opening/closing properly

A freezer door or drawer that will not open or close properly usually points to hinge or stop problems rather than a sealed system fault. The most likely causes, in order, are a bent or damaged door hinge, a worn or broken refrigerator freezer door stop, and problems with the bottom, top or center hinge assemblies or hinge kit. A sagging bottom hinge or misaligned center hinge lets the freezer door sit uneven so the fridge door not closing properly and the gasket will not seal, which leads to warm air and frost buildup. Inspect hinges, hinge mounts and the door stop for cracks, stripped screws or bent metal, tighten loose fasteners, and replace any bent hinge or worn stop. If the door sits off level, an adjusted or new hinge kit usually fixes it. Enter your model number on RepairClinic.com to find the exact replacement hinge, hinge kit or door stop for your specific refrigerator and get the parts and repair instructions you need.

01 - Tappan Refrigerator Door Hinge

A damaged or bent door hinge could cause the freezer door to be misaligned and not close properly. Inspect the hinge for defects and replace if necessary.
Enter model number to search for the required part specific to your product
Common

02 - Tappan Refrigerator Door Stop

A damaged refrigerator freezer door stop can prevent the door from closing properly. Inspect the component for signs of wear and replace if necessary.
Common

03 - Tappan Refrigerator Bottom Hinge

A damaged or bent bottom hinge could cause the freezer door to sag and not close properly. Inspect the hinge for defects and replace if necessary.
Common

04 - Tappan Refrigerator Top Hinge

A damaged or bent bottom hinge could cause the freezer door to sag and not close properly. Inspect the hinge for defects and replace if necessary.
Common

05 - Tappan Refrigerator Center Hinge

A damaged or bent center hinge could cause the freezer door to be misaligned and not close properly. Inspect the hinge for defects and replace if necessary.
Common

06 - Tappan Refrigerator Door Hinge Kit

A damaged or bent door hinge could cause the freezer door to be misaligned and not close properly. Inspect the hinge for defects and install new door hinge kit components if necessary.
Common

Frequently Asked Questions

Why is my freezer door not closing properly?
My refrigerator door is sagging or misaligned. How do I adjust the hinges?
The freezer is cold but the fridge section is warm. Can a door that won't close cause this?
How do I find the correct hinge or door stop for my model on RepairClinic.com?
Can I replace a door hinge or door stop myself, or should I call a technician?

Shop by Tappan Refrigerator Parts